The Hansgrohe Ecostat Comfort kit ships in polished chrome as standard. Brushed finishes carry a -BR suffix.

10–35 mm adjustment on Hansgrohe concealed valves — use the shroud packer to hide any tile mismatch.

OEM or aftermarket for Hansgrohe?

For TMV2/TMV3 compliance always fit genuine Hansgrohe cartridges. Aftermarket voids the Ecostat Comfort approval.

How to Replace the Shroud Kit on a Hansgrohe Ecostat Comfort (UK)

Replace the concealing plate and shroud on the Hansgrohe Ecostat Comfort where limescale has locked the temperature handle.

Undo the two handle grub screws (2.5 mm hex on most Hansgrohe models). Lift the shroud off — do not lever, it cracks.

Fit new O-rings between the wall plate and shroud to keep the IP54 rating.

Balance hot and cold to within 0.5 bar. Run the Hansgrohe Ecostat Comfort at max flow for 3 minutes.

Verify max outlet temperature stays below 46 °C per BS EN 1111 by shutting off cold and reading the outlet.

Chrome or brushed?: The Hansgrohe Ecostat Comfort kit ships in polished chrome as standard. Brushed finishes carry a -BR suffix.
Wall plate offset?: 10–35 mm adjustment on Hansgrohe concealed valves — use the shroud packer to hide any tile mismatch.
OEM or aftermarket for Hansgrohe?: For TMV2/TMV3 compliance always fit genuine Hansgrohe cartridges. Aftermarket voids the Ecostat Comfort approval.

Shop the spares

Browse shower spares — 5,410 live parts.