How to Replace the Flow Cartridge on a Hansgrohe ShowerTablet Select 400 (UK)
UK guide to swapping the flow cartridge in a Hansgrohe ShowerTablet Select 400 shower valve. TMV2 compliance, part numbers, tools.
The part
Fit a new flow-control cartridge on the Hansgrohe ShowerTablet Select 400 to fix stiff or leaking on/off — usually a 1/4-turn ceramic disc.
Isolate
Close the built-in isolators on the Hansgrohe ShowerTablet Select 400 valve body — accessed through the escutcheon plate.
Swap the flow cartridge
Some Hansgrohe valves use handed cartridges (L/R). Match the flat on the spindle to the handle orientation before refitting.
Commission
Balance hot and cold to within 0.5 bar. Run the Hansgrohe ShowerTablet Select 400 at max flow for 3 minutes.
Verify max outlet temperature stays below 46 °C per BS EN 1111 by shutting off cold and reading the outlet.
Frequently asked questions
- Standard or reversed?
- Standard Hansgrohe cartridges close clockwise. Reverse handles will require the -R variant.
- Any grease?
- Silicone grease only — petroleum jelly attacks the EPDM seals.
- OEM or aftermarket for Hansgrohe?
- For TMV2/TMV3 compliance always fit genuine Hansgrohe cartridges. Aftermarket voids the ShowerTablet Select 400 approval.
Browse shower spares — 5,410 live parts.
View Shower Spares