The Methven Aurajet Aio Bar kit ships in polished chrome as standard. Brushed finishes carry a -BR suffix.

10–35 mm adjustment on Methven concealed valves — use the shroud packer to hide any tile mismatch.

OEM or aftermarket for Methven?

For TMV2/TMV3 compliance always fit genuine Methven cartridges. Aftermarket voids the Aurajet Aio Bar approval.

How to Replace the Shroud Kit on a Methven Aurajet Aio Bar (UK)

Replace the concealing plate and shroud on the Methven Aurajet Aio Bar where limescale has locked the temperature handle.

Undo the two handle grub screws (2.5 mm hex on most Methven models). Lift the shroud off — do not lever, it cracks.

Fit new O-rings between the wall plate and shroud to keep the IP54 rating.

Balance hot and cold to within 0.5 bar. Run the Methven Aurajet Aio Bar at max flow for 3 minutes.

Verify max outlet temperature stays below 46 °C per BS EN 1111 by shutting off cold and reading the outlet.

Chrome or brushed?: The Methven Aurajet Aio Bar kit ships in polished chrome as standard. Brushed finishes carry a -BR suffix.
Wall plate offset?: 10–35 mm adjustment on Methven concealed valves — use the shroud packer to hide any tile mismatch.
OEM or aftermarket for Methven?: For TMV2/TMV3 compliance always fit genuine Methven cartridges. Aftermarket voids the Aurajet Aio Bar approval.

Shop the spares

Browse shower spares — 5,410 live parts.