The Methven Kiri Satinjet kit ships in polished chrome as standard. Brushed finishes carry a -BR suffix.

10–35 mm adjustment on Methven concealed valves — use the shroud packer to hide any tile mismatch.

OEM or aftermarket for Methven?

For TMV2/TMV3 compliance always fit genuine Methven cartridges. Aftermarket voids the Kiri Satinjet approval.

How to Replace the Shroud Kit on a Methven Kiri Satinjet (UK)

Replace the concealing plate and shroud on the Methven Kiri Satinjet where limescale has locked the temperature handle.

Undo the two handle grub screws (2.5 mm hex on most Methven models). Lift the shroud off — do not lever, it cracks.

Fit new O-rings between the wall plate and shroud to keep the IP54 rating.

Balance hot and cold to within 0.5 bar. Run the Methven Kiri Satinjet at max flow for 3 minutes.

Verify max outlet temperature stays below 46 °C per BS EN 1111 by shutting off cold and reading the outlet.

Chrome or brushed?: The Methven Kiri Satinjet kit ships in polished chrome as standard. Brushed finishes carry a -BR suffix.
Wall plate offset?: 10–35 mm adjustment on Methven concealed valves — use the shroud packer to hide any tile mismatch.
OEM or aftermarket for Methven?: For TMV2/TMV3 compliance always fit genuine Methven cartridges. Aftermarket voids the Kiri Satinjet approval.

Shop the spares

Browse shower spares — 5,410 live parts.